The 1000x Lab

The 1000x Lab Initiative First Congress in Austin brought together leaders in industry, academia, and government to explore new ways to accelerate materials R&D. Modeled after the SciPy community, a primary goal of the initiative is to establish an analogous community developing and sharing open source tools for fast, inexpensive, and scalable materials measurements. Above, Mark Simon, R&D Director at Saint-Gobain, delivers an industry keynote presentation. 

The 1000x Lab: Accelerating Materials Science and Chemistry R&D

AuthorsEric Jones, Ph.D., CEOMichael Heiber, Ph.D., Application Engineer, Colin McNeece, Ph.D., Director, Digital Transformation Services, Amir Khalighi, Ph.D., Manager, Digital Transformation Services, Roger Bonnecaze

Industry R&D Motivations

Materials science and chemistry laboratories gain significant advantage by moving from limited, expensive experiments yielding a small amount of data (most often the situation today), to large numbers of lower cost experiments yielding orders of magnitude more data. This advantage comes through increased knowledge, efficiency of expert time, and greater lab throughput. This is the idea behind The 1000x Lab initiative.

Increasingly, leaders in the materials and chemistry industries seek to leverage data-driven models (AI and ML) and calibrated simulations to accelerate product development at lower costs. They imagine using these methods to replace expensive laboratory measurements. The vision is good, but the strategy is at risk of undermining the ultimate goal.

Building data-driven models and eliminating experiments are often mutually exclusive in scientific discovery. The strength of data-driven models is proportional to the amount and quality of data that they are trained on, and experiments are where the data are produced. For data-driven methods to have the most business impact, labs must significantly reduce the cost per data point.

This vision of data-driven R&D relies on a significant change to the status-quo in many laboratories. There are shining exceptions, but in many industrial specialty chemical labs, we have consistently seen opportunities to increase the lab throughput by 10x, 100x, or even 1000x with lower costs per sample by redesigning experimental workflows to utilize automation and other digital tools.

However, these ideas are often perceived as too expensive or impractical, the change too radical. This hesitation is not surprising. The majority of scientists have spent their careers in labs designed around and reliant on labor intensive human interaction. Realizing the lab of the future will require that gaps in skills and imagination are addressed, and most importantly, examples of what is possible are provided.

R&D systems design digital transformation

Figure 1:  There is a major need to rethink traditional, human-centric R&D systems. In this example, humans manually perform fabrication and characterization tasks, move samples between physical workstations around the lab, and record/save data in lab notebooks or on USB data drives. Instead, modular, digital-centric R&D systems execute the most common and time-consuming tasks so that expert scientists can spend more time on data analysis and decision making. 

The Path to Accelerated Experimentation

To address this challenge, Enthought CEO Eric Jones and UT-Austin Prof. Roger Bonnecaze have created the The 1000x Lab initiative. The goal of this open innovation initiative is to establish a community of practice for people developing tools and methodologies, and to provide examples that can help scientists embrace transformative change in their materials science and chemistry laboratories.

Modeled after the SciPy open-source scientific Python community that Enthought CEO Eric Jones founded in 2002, the initial goal is to establish an engaged community developing and sharing open source tools for fast, inexpensive, scalable science, focused on materials processing and characterization. We believe that the necessary lab design shifts to deliver 1000x lab performance can be facilitated through the following principles:

  • Bring measurements to materials: Design experiments to incorporate miniaturized, modularized measurement devices in the material fabrication and testing pipeline, rather than taking the materials out for external characterization, to gather more data faster.
  • Miniaturize measurements: Often industrial standards require large amounts of material for testing. In many cases, correlative results may be possible with much smaller sample sizes, thereby lowering the cost to test each candidate material.
  • Utilize appropriate technology: Often measurements are done with very expensive instruments when much simpler, less expensive equipment would do.  This can enable automation in areas where it was previously considered to be too expensive.
  • Standardize common processes: Best practices for automating common steps in sample preparation and handling are not well-established. For example, liquid and powder measurement and dosing are often a challenge that stops lab automation in its tracks.  Using the above, establish methods and design equipment as building blocks for these common tasks to accelerate adoption of automated lab workflows.
  • Facilitate data storage and use: Automation generates large quantities of valuable information. Managing this data so that it is available for analysis (contextualized, searchable, easily retrieved) is critical for extracting value from automated lab systems.

To expand on the concept of “appropriate technologies”: It has never been easier to create customized, low cost components using digital design tools, simulation software, and 3D printing. While these concepts are quickly being embraced by the passionate hobbyist and in a number of manufacturing industries, the uptake in R&D labs is lagging.

This lag is in part due to the false notion that every lab experiment must be of the highest quality, and reflect exactly what measurements a customer is requesting, for example to meet certified test standards. There will always be a need for high quality lab measurements, especially those that are reported for compliance or in a certificate of analysis. However, only a small fraction of materials that go through a modern lab need such scrutiny.

low cost, high throughput

Figure 2: In a materials screening workflow, a new modality of low-cost, high-throughput sample fabrication and characterization can provide the data needed to filter out a majority of the candidates before slower, more expensive measurements are needed. 

This shift towards open design may be viewed as a threat to the business of traditional equipment vendors, inhibiting progress. However, not all designs must be open, and there are opportunities for a new generation of lower cost high-throughput and digital-centric lab equipment.

It is the intent of The 1000x Lab initiative to create an environment where the needs of industry, academia, and government are well understood so that lab builders, instrument vendors, and other parts of the supply chain can understand how to work together to cover the range of quality and throughput needs. Foundational to this are:

  • A shift from human-centric to digital-centric labs and experimental designs
  • Support for well-documented physical and digital interfaces that conform to best practices
  • Design for inter-compatibility between modules from different technology providers

Forming the Community 

The 1000x Lab initiative held its first congress in Austin, TX in February 2020, bringing together a small group of leaders from industry, academia, and government. The objective was to create a vision for how to accelerate industrial materials and chemical R&D, and for the industry participants, how The 1000x Lab initiative can impact their businesses.

The 1000x Lab: First Congress participating companies and institutions:

  • Procter & Gamble
  • Saint-Gobain
  • Bristol Myers Squibb
  • Pepsico
  • Tokyo Electron
  • Mitsubishi Chemical
  • Enthought
  • University of Texas at Austin
  • University of Delaware
  • University of California-Davis
  • Massachusetts Institute of Technology
  • University of Illinois at Urbana-Champaign
  • ESPCI Paris
  • National Institute of Standards and Technology

There were an array of perspectives from industry representatives in personal care products, food and beverage, semiconductor manufacturing, pharmaceutical drug development, building materials, and specialty chemicals. This was augmented by perspectives from academia and government researchers, advocating for proactive investment and innovation in materials measurement technologies.

First Congress Takeaway Messages:

  • Everyone has data organization challenges.
  • The pharmaceutical industry leads in lab automation and could demonstrate value and show what is possible.
  • There is a need for fast, inexpensive proxy measurements for early candidate screening.
  • Industry researchers are concerned about loss of quality, reliability, support with DIY equipment, pointing to an opportunity for equipment manufacturers to get involved.
  • Industry R&D labs may not have budgets or appetite to take risk on transformative workflows, highlighting a need to quantify the value of such initiatives.
  • There is a need for a functional industry relevant example of a digitally-centric R&D system to demonstrate value and lower the perception of risk.

1000x lab initiative

Figure 3: The 1000x Lab: First Congress group picture.

The Path Forward

Despite the constraints imposed by the COVID-19 crisis, the initiative continues to progress. The scientific Python software community has been engaged through a virtual presentation at the SciPy 2020 annual conference, setting the stage to expand the reach of the community when conditions allow. The COVID-19 crisis itself further highlights the need for digitally-centric labs as many researchers have been forced to stay away from crowded human-driven labs. Having digital-centric labs can enable R&D scientists and technicians to continue their valuable work remotely, albeit with some constraints.

From the first congress, it became clear that a convincing example of a digital-centric R&D system is needed to generate greater industry buy-in. With this in mind, an exemplar low-cost polymer solution formulation, rheological characterization, and printing system is being developed to aid in rapid screening and optimization of electronic thin films.

To get involved with The 1000x Lab initiative and receive updates about future events, please contact us at info@1000xlab.com.

Learn more from Enthought. Working with a specialty chemicals partner, Enthought are designing low-cost optical imaging systems for the accelerated development of printed polymer films for display applications (see the SciPy 2020 conference presentation about this work here).

About the Authors

Eric Jones, Ph.D., Founder and CEO at Enthought, holds a Ph.D. and M.S. in electrical engineering from Duke University and a B.S.E. in mechanical engineering from Baylor University and is the founder and CEO of Enthought.

Michael Heiber, Ph.D., Manager, Materials Informatics at Enthought, holds a Ph.D. in polymer science from The University of Akron and a B.S. in materials science and engineering from the University of Illinois at Urbana-Champaign

Colin McNeece, Ph.D., holds a Ph.D. in geology from the University of Texas at Austin, a M.A. in earth and planetary sciences, and a B.A. in geology from the University of California, Berkeley.

Amir Khalighi, Ph.D., Manager, Digital Transformation Services at Enthought, holds a Ph.D. and a M.S.E in mechanical engineering from The University of Texas at Austin and a B.S in mechanical engineering from the Sharif University of Technology.

Roger Bonnecaze holds a Ph.D. and M.S. from California Institute of Technology and a B.S. from Cornell University, all in chemical engineering, and is currently the William and Bettye Nowlin Chair Professor of Chemical Engineering at University of Texas at Austin.

Share this article:

Related Content

産業用の材料と化学研究開発におけるLLMの活用

大規模言語モデル(LLM)は、すべての材料および化学研究開発組織の技術ソリューションセットに含むべき魅力的なツールであり、変革をもたらす可能性を秘めています。

Read More

デジタルトランスフォーメーション vs. デジタルエンハンスメント: 研究開発における技術イニシアティブのフレームワーク

生成AIの登場により、研究開発の方法が革新され、前例のない速さで新しい科学的発見が生まれる時代が到来しました。研究開発におけるデジタル技術の導入は、競争力を向上させることが証明されており、企業が従来のシステムやプロセスに固執することはリスクとなります。デジタルトランスフォーメーションは、科学主導の企業にとってもはや避けられない取り組みです。

Read More

R&D イノベーションサミット2024「研究開発におけるAIの大規模活用に向けて – デジタル環境で勝ち残る研究開発組織への変革」開催レポート

去る2024年5月30日に、近年注目のAIの大規模活用をテーマに、エンソート主催のプライベートイベントがミッドタウン日比谷6FのBASE Qで開催されました。

Read More

科学研究開発における小規模データの最大活用

多くの伝統的なイノベーション主導の組織では、科学データは特定の短期的な研究質問に答えるために生成され、その後は知的財産を保護するためにアーカイブされます。しかし、将来的にデータを再利用して他の関連する質問に活用することにはあまり注意が払われません。

Read More

デジタルトランスフォーメーションの実践

デジタルトランスフォーメーションは、組織のデジタル成熟度を促進し、ビジネス価値を継続的に提供するプロセスです。真にビジネスを変革するためには、イノベーションを通じて新しい可能性を発見し、企業が「デジタルDNA」を育む必要があります。

Read More

科学研究開発リーダーが知っておくべき AI 概念トップ 10

近年のAIのダイナミックな環境で、R&Dリーダーや科学者が、企業の将来を見据えたデータ戦略をより効果的に開発し、画期的な発見に向けて先導していくためには、重要なAIの概念を理解することが不可欠です。

Read More

科学における大規模言語モデルの重要性

OpenAIのChatGPTやGoogleのBardなど、大規模言語モデル(LLM)は自然言語で人と対話する能力において著しい進歩を遂げました。 ユーザーが言葉で要望を入力すれば、LLMは「理解」し、適切な回答を返してくれます。

Read More

ITは科学の成功にいかに寄与するか

科学と工学の分野においてAIと機械学習の重要性が高まるなか、企業が革新的であるためには、研究開発部門とIT部門のリーダーシップが上手く連携を取ることが重要になっています。予算やポリシー、ベンダー選択が不適切だと、重要な研究プログラムが不必要に阻害されることがあります。また反対に、「なんでもあり」という姿勢が貴重なリソースを浪費したり、組織を新たなセキュリティ上の脅威にさらしたりすることもあります。

Read More

科学データを活用して発見とイノベーションを加速する

デジタルトランスフォーメーションがもたらす変革の中心にはデータがあります。研究開発におけるデジタルトランスフォーメーションでは科学データを取り扱いますが、科学データには他の業務データと異なる特徴があり、取り扱い方に注意を払う必要があります。

Read More

Top 5 Takeaways from the American Chemical Society (ACS) 2023 Fall Meeting: R&D Data, Generative AI and More

By Mike Heiber, Ph.D., Di…

Read More